SIte-Site Tunnel establishing btn two cisco 1721 Routers

[Ramu Ch]

Hi ,

I need to establish IPSec site-site tunnel betweeen cisco 1721 (version supports for IPSec ) .Can u help me the basic configuration to establish.

The Network diagram is standard only .The objective of the set up is to establsih a  communication between both end peers.

Ie  LAN ---> Router ---> Internet ---> Router ---> LAN

Thanks in advance

Regards

Ramu

[Jennifer Halim · Accepted solution]

Sure, here is a sample configuration for Site-to-Site VPN tunnel between 2 IOS routers:

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080194650.shtml

Hope that helps.

[Ramu Ch]

Really Thanks for the timely help

Where can i Rate this post,I need to give Good rate for this.

Regards

Ramu

[Jennifer Halim]

Cheers, and thanks for the rating.

[Ramu Ch]

Hi,

I need a Good Document on Cisco  IOS Basics which includes

1)  IOS Compatibilty features

2)  IOS Troubleshooting issues

3)  Resolving IOS Related issues

At least cisco  path is enough , i will search the pages. This will helps me to select the Right Product for New deployments.

Regards

Ramu

[Jennifer Halim]

Here is the list of troubleshooting guide documents that have been written for IOS:

http://www.cisco.com/en/US/products/ps5853/prod_tech_notes_list.html

Here is the list of sample configurations written for IOS:

http://www.cisco.com/en/US/products/ps5853/prod_configuration_examples_list.html

And for feature compatibility, it is best to use the Cisco Feature Navigator tool:

http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

Hope that helps.