Split Tunnelling

[eric.mofammere]

Hi guys,

I have split tunneling configured and everything it works 100%. When the users are remotely connected to my network they use their ISP to go to the internet and it doesn't go through the VPN. The problem is i want access to certain IP addresses that are located on the internet to go through the VPN and get Natted to my firewall's external IP address that my client has white-listed on their side. Any ideas on how can i accomplish this?

Here my split tunneling configs:

split-tunnel-policy tunnelspecified
split-tunnel-network-list value SPLIT

access-list  SPLIT standard permit 10.0.0.0 255.0.0.0

access-list  SPLIT standard permit 172.16.0.0 255.255.0.0

ip local pool VPN - Pool 10.3.200.1-10.3.200.100 mask 255.255.255.0

[Flavio Miranda]

Hi,

 If this is your whole split tunnel then access to the internet should not go through VPN, only access to the network 10 and 172.

  Any network different from those should go via default route through the local ISP to the Internet.

-If I helped you somehow, please, rate it as useful.-