SSL_VPN feature license on Cisco 1941 not deployed

[sunnysly1]

Hi All,

I have recently purchased 2 x 1941 routers with 2 L-SL-19-SEC-K9= and 2 L-FL-SSLVPN10-K9= licenses. I've installed the licenses through Cisco Configuration Pro ver 2.5 and installation did not generate any errors. After saving config and reloading the device, on the License dashboard, the deploy status for the SSL VPN is "Not deployed" and I have no way of deploying it. The state also says "Active, Not in use". I have tried reinstalling the license via command line but get error "license duplicate - already installed" suggesting the installation was OK. The sec license deployed without any issues.

Is there any way to manually deploy this SSL_VPN license? It's killing me.

[marco01]

Hello,

I've the same problem with a Cisco 892 Router. I installed and deployed the license by using the Cisco License Manager. On the  Cisco Configuration professional License Dashboard the status is not deployed. The output on the cli for sh license is :

Feature: SSL_VPN

        Period left: Life time

        License Type: Permanent

        License State: Active, Not in Use

        License Count: 25/0/0  (Active/In-use/Violation)

        License Priority: Medium

Is there any solution to deploy the license.

[ravir]

When you see this in the CLI output:

-----------

Feature: SSL_VPN

        Period left: Life time

        License Type: Permanent

        License State: Active, Not in Use

        License Count: 25/0/0  (Active/In-use/Violation)

        License Priority: Medium

---------------

The license is already deployed - could be that the CCP is out of sync somehow...

[ravir]

Looks like the license is already deployed. Go ahead and configure the SSL_VPN features.    

[marco01]

Hello,

you're right. I tryed to configure the ssl-vpn and it works. So I think it' a bug with the CCP.

Thanks.