We have an ASA 5510 at site A and ASA 5505 at site B, connected together using a site-to-site SSL VPN.
Site A has an internal IP range of 192.168.0.x
Site B has an internal IP range of 192.168.10.x
AnyConnect VPN users have an internal IP range of 192.168.50.x
The anyconnect VPN goes via the 5510 at site A.
People at site A or B can see the alternate site fine internally, but those using the anyconnect VPN cannot see site B, only site A.
I'm not particular great with the CLI, so most of the management is done with the ASDM on both sites.
Does anyone have any suggestions as to what's causing this, or what I can do to resolve it?
I can post running configs of both sites if necessary.
Need to resolve this asap, as we're going to be relying on it alot more in about a week!!
TIA