We want to use Point Of Sale (POS) machine to connect to the public IP of the ASA through SSL port 443, and then ASA will have to forward the traffic to the Server on port 6000 which would be placed behind the ASA.
I am not sure what this has to do with VPNs other than using the port TCP/443
I assume your problem is that both the ASDM and SSL VPN on an ASA firewall use the port TCP/443?
If that is the problem then you could naturally change both the ASDM management port used and also the SSL VPN used port. Though in my opinion changing the SSL VPN port probably is a bit problematic as this need to be taken into consideration by the user.
ASDM port can be changed with command
http server enable port <port>
The SSL VPN port can be changed with commands
webvpn port <port>
I am a bit rusty as I have not participated on these forums for some time now. The ASDM port changed should not be a big problem for the admin though it might cause confusion if happen to forget that the default port was changed.
I am not completely sure about the implications of changing the default SSL VPN port. Atleast you will need to take into consideration the nondefault port when connection as it will have to be added with the VPN device IP address when connecting.
IF you are just looking for the configuration format of the Static PAT then it would be the following
I am involved in rolling out about 40 wifi networks using cisco 3602/2802 aps and cisco 5508 ISE. Our network offers a 2 step authentication with user and machine certificates as well as users needing to be in correct AD groups. The problem we have i...
ASA Site-to-Site VPN using IKEV1 Configuration Example
Configure a Site-to-Site IPSec IKEv1 Tunnel Between an ASA and a Cisco IOS Router
Site-to-Site IKEv2 Tunnel between ASA and Router Configuration Examples
Site-to-Site VPN Tunnel wit...
Dear Community, So, according to the Cisco ISE Release 2.7 Administrator Guide, it should be possible to use a remote lock/wipe on MDM-devices that connect through ISE on the network( see the screenshot in the attachment).The problem is that th...
Hi, We currently have 2 Cisco 5525X ASA's in active/standby state. We have 750 concurrent Anyconnect licenses with the below licenses:AC-PLSM-5YR-500-S & AC-PLSM-5YR-250-S. (These are expiring soon) I have asked to get these renewed by our l...
Hi Everyone, Does anyone know if it is possible create a NAT for Cisco Anyconnect to a different IP so that the user doesn't have to use the External IP? We want to use a different dns name and assign to a different set group of users. Thank you...