Static DHCP reservations for VPN 3005 dial-up clients?

[jhatfield]

I have a customer that is using a VPN 3005 w/ NT Authentication and NT DHCP. They have dial-up ISP users that they need to assign static internal addresses to (unix printing).

I first thought I could make static reservations in the NT DHCP pool, but the VPN 3005 assigns a dynamic MAC value each time the dial-up users grab a DHCP address. There does not appear to be a way in the client (3.6.2A) to assign one.

Any thoughts or suggestions greatly appreciated, thanks in advance.

[kdurrett]

You can have the concentrator assign static address to the client. You will need to use local authentication and go into each user and configure there ip address.

Kurtis Durrett

[Nelson Rodrigues]

Also make sure that the Address Assignment method is set to Assign Address from Authentication Server (the built-in/internal Radius server of the VPN 3K, that is).

Nelson

[d-garnett]

on the Concentrator (if using internal user auth), you can assign IP's on a per user basis (Local Pool not DHCP)