09-10-2014 06:41 AM - edited 02-21-2020 07:49 PM
Hi Experts,
Is there any command or a way to to see the through put for the ipsec tunnel ? or GRE
I can generate some load by transferring the file over and see it live on the ASA, what the current thought is ?
I have also attached the document defining the theoretical values for the different models.
09-10-2014 06:55 PM
Hi muhammadrafi
For this purpose I think is better if you implement Netflow of NSEL on the device.
Hope this helps'
-Randy-
09-11-2014 03:20 AM
Thanks Randy,
Is there any other way besides netflow ? i know you mention is one way but I am looking for any other way.
lets say if netflow is not an option for us.
09-11-2014 10:32 AM
Hi ,
As far as I know there is no command to check the throguput of a tunnel ,
In most cases what we recommend is to establish a baseline and test the connection with and without the VPN.
Using a FTP server or ipref software.
Hope this helps
- Randy -
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide