Triple and Quad DSL service

[study_voip]

Is there any Cisco router can hold 3 or 4 DSL lines?

if 26xx or 36xx can do this, how ISP assign IP to the 3 or 4 lines? different subnet? or same subnet, if same subnet, how to configure it ? by multilink PPP or others ?

Thanks

[dbellaze]

You would need at least 2600 to support 3 cards.

This link outlines the hardware that supports the WICS in the section Supported Hardware.

http://www.cisco.com/en/US/products/hw/routers/ps274/products_data_sheet09186a0080088713.html

As far as the IP's go if you are going to the same ISP and they support PPP Multilink then you have the ability to bind your cards together and have one IP subnet, if not then each DSL connection will have its own IP subnet.

Daniel