cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1157
Views
0
Helpful
4
Replies
Highlighted
Explorer

Troubleshooting PPTP-VPN

We have configured PPTP-VPN in two routers Cisco. Here you have our configuration:

.

!

vpdn enable

!

vpdn-group Group_VPDN

accept-dialin

protocol pptp

virtual-template 1

!

interface Virtual-Template 1

ip unnumbered ser0/0.100

peer default ip address pool VPDN-pool

ppp encrypt mppe auto

ppp authentication chap ms-chap

!

!

ip local pool VPDN-pool 192.168.30.1 192.168.30.14

!

!

ip route 0.0.0.0 0.0.0.0 Serial1/0.100

!

end

These PPTP-VPN configurations worked very well for many months, when they were using PCs running Windows 2K, and Win XP-SP1.

Since they upgraded their PCs to WinXP Service-Pack 2 our problems began. None of them can establish a PPTP-VPN connection to our routers.

During our tests we have seen we can establish VPDN connections to these routers from PCs running Win2k, Win98 and WinXP-SP1 but NEVER from Win XP-SP2 ones.

We have opened UDP 62515, TCP 10000 and TCP 4500 ports at our Win XP-SP2 ws, we have turned off the Windows Firewall but we have never established a PPTP-VPN connection from them.

Please, Could any of you give us some ideas about How to fix this problem ???

Thank You

Angel Enrique Villasana

4 REPLIES 4
Highlighted
Beginner

Hello Angel, this is a config I used recently and it works with my XP with SP2 installed, please give it a try, as you will see the only difference is the last line. If this doesn't work then I think you'll need to look at the XP settings for VPN

Regards Tony

vpdn enable

!

vpdn-group 1

! Default PPTP VPDN group

accept-dialin

protocol pptp

virtual-template 1

!

interface Virtual-Template1

ip unnumbered Ethernet0

peer default ip address pool clientpool

no keepalive

ppp encrypt mppe auto

ppp authentication pap chap ms-chap

Highlighted

Hi, let me tell you It works !

Thank you for your help

Angel Villasana

Highlighted

Hi,

What error message do you get? Further, PPTP requires TCP 1723 and IP 47.

Highlighted

Hi, i get a 619 error at Win XP-SP2 when I try to establish my PPTP-VPN connection.

I have opened TCP 1723, what's more, I have turned off the firewall feature at my XP-SP2 PCs. But I will try with IP 47 today.

Thank you for your effort

Angel Enrique Villasana

Content for Community-Ad