08-24-2008 04:52 PM - edited 02-21-2020 03:54 PM
I've successfully deployed this and wrote a tutorial about it, given the number of questions that I found floating around this subject on the web I figured some of you might be interested. I've also pointed out several issues that can arise while implementing such as NAT issues with directly attached hosts to the DMVPN Hub and an error in the Cisco examples that are available. You can find it here: http://edge-technology.blogspot.com/2008/08/easyvpn-server-and-dmvpn-hub-on-1-cisco.html
Regards,
Sander
08-25-2008 06:42 AM
Have you seen this link?
http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00801eafcb.shtml
Regards
Farrukh
08-25-2008 07:12 AM
Yes, I also referred to it in my tutorial. However as some of the configurations as mode transport for the transform-set and NAT can cause problems I decided to write my own tutorial.
08-25-2008 10:52 AM
Oops sorry I did not read your initial post carefully enough. Thanks for sharing your tutorial on NETPRO.
Regards
Farrukh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide