VPN Access Problem

[sarojpradhan]

The VPN Client users PC behind the Cisco asa5510 FW in the NATTED environment.

They  use      IPSEC VPN Client to connect the VPN configured on the      PIX535 Box  able to connect the VPN but unable to ping or access server after the VPN connection.

i have already enabled NAT-T on my ASA.

I captured the Log from the ASDM  Which is :regular translation creation failed for protocol 50

Please advice.

Thanks ,

Saroj

[Federico Coto Fajardo]

Hi,

You have a VPN client giong through an ASA 5510 to get to the PIX 535 correct?

If the ASA is doing PAT, you need to enable NAT-T on both ends of the tunnel as you mentioned.

You can also add ipsec-pass-thru to the global_inspection policy.

Federico.

[sarojpradhan]

Thanks sir.....

The issue has been resolved after running the NAT -T at the Head end of vpn.

Thanks,

Saroj