VPN

Hi,I currently have an IPv4 site-to-site VPN betewen two IPV4 and it works fine (ASA5505).Now I would like to set up, in addition to that tunnel, an ipv6 to ipv6 site-to-site vpn between those same endpoint.  To be clear, the endpoints will speak ove...

I configured a network of around 13 branches using DMVPN Phase 1 and EIGRP ( 2 backup links)   . Now the problem is at one branch the tunnel is up but there is no ping or communication at one branch . This happens sometimes and the network monitoring...

Hi all,I have a DSL line connection at the spoke site running DMVPN back to HQ (running eigrp stub).  I thought that if you lose for a second the connection on the DSL, the tunnels will drop, but I was testing it today and I disconnected the DSL line...

Hi all,I'd like to be able to limit group access within AnyConnect.  Right now anyone can select any group and sign on in to whatever group they choose.  I've been researching ideas on how to go about this.  We're currently setup only to use RSA Secu...

Hi,I need some advices regarding the following design.One of our customer is runing a DMVPN dual hub design phase 2.The customer wants to add a router at a spoke location to achive hardware and line redundancy. So I would like to know what is the bes...

Good morning everyone. I am a new visitor to the site even if a number of years working with Cisco appliances. In the company we bought 2 ipad 2 that I want to connect through ASA5505 AnyConnect on a corporate network. From research done should be en...

Hi.I am trying to configure SSL VPN to fit my needs and im not sure how to do this.What i want to accomplish is that people using the VPN should be able to use remote desktop protocol to work from home to a couple of machines on the network.Another t...

Hello,Are there any configuration documents that shows how to configure a Cisco ASA5540 for client VPN access using smartcards and Microsoft IAS.  Microsoft IAS will stand between the ASA5540 and Active Directory.Thanks.

Hello,I have a router 1812. I have Vpn site-2-site configureand it's working good. I need to configure SSL Vpn for our mobile clients. The problem is that my url-list has 2 web links. The link with the name of the servers it doen't work (dns resolvin...

Hi friends,I have some doubt on the following scenario.          Internet router------------------> Internet firewall----------------> Dept firewall--------------> users1.2.3.50            1.2.2.1/29      1.2.2.2/29      1.2.2.9/29        1.2.2.10/29...

I have an ASA5505 with 8.2 (3) running. The following is the routing table: (I have substuted 200.200.200.x for actual IPs)Gateway of last resort is 200.200.200.1 to network 0.0.0.0                                                                     ...