cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
428
Views
0
Helpful
1
Replies

VPN authentication problem

Hello!!!

We are having problem conneting to VPN, these are the logs:

6|Nov 24 2015|09:27:28|602304|||||IPSE C: An outbound remote access SA (SPI= 0x1D425E55) between 62.x.x.x.x and 58.x.x.x.x (user= cltvpn)
has been deleted.
4|Nov 24 2015|09:27:28|113019|||||Group = ttia, Username = cltvpn, IP = 58.x.x.x, Session disconnected. Session Type: IKE, Duration: 0h:00m:05s,
Bytes xmt: 0, Bytes rcv: 0, Reason: User Requested
5|Nov 24 2015|09:27:28|713259|||||Group = ttia, Username = cltvpn, IP = 58.x.x.x, Session is being torn down. Reason: User Requested
6|Nov 24 2015|09:27:28|602303|||||IPSEC: An outbound remote access SA (SPI= 0x1D425E55) between x.x.x.x and 58.x.x.x (user= cltvpn)
has been created.
3|Nov 24 2015|09:27:28|713902|||||Group = ttia, Username = cltvpn, IP = 58.x.x.x, Removing peer from correlator table failed, no match!
5|Nov 24 2015|09:27:28|713050|||||Group = ttia, Username = cltvpn, IP = 58.x.x.x, Connection terminated for peer cltvpn. Reason: Peer Terminate
Remote Proxy 192.168.200.115, Local Proxy 0.0.0.0
5|Nov 24 2015|09:27:28|713049|||||Group = ttia, Username = cltvpn, IP = 58.x.x.x, Security negotiation complete for User (cltvpn) Responder,
Inbound SPI = 0x22d439c7, Outbound SPI = 0x1d425e55
5|Nov 24 2015|09:27:28|713075|||||Group = ttia, Username = cltvpn, IP = 58.x.x.x, Overriding Initiator's IPSec rekeying duration from 2147483 to
28800 seconds
5|Nov 24 2015|09:27:28|713119|||||Group = ttia, Username = cltvpn, IP = 58.x.x.x, PHASE 1 COMPLETED
6|Nov 24 2015|09:27:28|713905|||||Group = ttia, Username = cltvpn, IP = 58.x.x.x, Gratuitous ARP sent for 192.168.2x.x
6|Nov 24 2015|09:27:28|713228|||||Group = ttia, Username = cltvpn, IP = 58.x.x.x, Assigned private IP address 192.168.2x.x to remote user
6|Nov 24 2015|09:27:28|713184|||||Group = ttia, Username = cltvpn, IP = 58.x.x.x, Client Type: WinNT Client Application Version: 5.0.07.0290
5|Nov 24 2015|09:27:28|713130|||||Group = ttia, Username = cltvpn, IP = 58.x.x.x, Received unsupported transaction mode attribute: 5
6|Nov 24 2015|09:27:27|734001|||||DAP: User cltvpn, Addr 58.x.x.x, Connection IPSec: The following DAP records were selected for this connection:
DfltAccessPolicy
6|Nov 24 2015|09:27:23|713172||||

I have ckecked everything and  it seems OK.

Regards

1 Reply 1

Richard Burts
Hall of Fame
Hall of Fame

I do not see in these logs what is the problem. I do see several messages that seem to show successes in parts of the process such as these messages which seem normal

Group = ttia, Username = cltvpn, IP = 58.x.x.x, PHASE 1 COMPLETED

Group = ttia, Username = cltvpn, IP = 58.x.x.x, Assigned private IP address 192.168.2x.x to remote user

DAP: User cltvpn, Addr 58.x.x.x, Connection IPSec: The following DAP records were selected for this connection:DfltAccessPolicy

Perhaps there might be logs from the client that will show what is the problem?

HTH

Rick

HTH

Rick