12-27-2006 05:40 PM - edited 02-21-2020 02:47 PM
I have Cisco 3000 with vpn client. On the remote computer, I can ping across the tunnel to the company servers and ping the router as well as netgear print server. I am using split tunnel with "allow local LAN access" enabled.
I am using IP address as the printer port (IP_192.168.134.10:L1), but it is not working with VPN tunnel up.
Where else I should look for?
Thanks
Scott
01-03-2007 06:19 AM
This document provides troubleshooting tips you can use in order to resolve connectivity issues with the Cisco VPN 3000 Concentrator
http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_tech_note09186a0080094eca.shtml
01-04-2007 11:26 AM
Hi Scott,
Disable the Client Firewall settings for the group and make sure you have no firewall on the Group's "General" tab, that will prevent the traffic.
If this helps, please rate.
Daniel
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide