cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
695
Views
7
Helpful
2
Replies
Highlighted
Beginner

VPN concentrator 3000 series is not shows any console screen

                             I use CISCO VPN CONCENTRATOR 3000 Series Is not work I do lots of troubleshoot but I cannot view the console screen with different terminal software (e.g.-putty, securert)

And I changed bound rate also 9600 and 115200 but still I cannot terminal vpn screen I check DRAM and MOTHERBOARD there was no problem I can’t find what is the issue

                             I checked console cable and every physical thing but every thing fails I need to up our vpn concentrator again please help for me

Everyone's tags (4)
2 REPLIES 2
Highlighted
Rising star

Re: VPN concentrator 3000 series is not shows any console screen

Mohamed,

I recommend you post this question to the Cisco Support Community since we don't provide technical assistance here.

https://supportforums.cisco.com/

I hope this helps. Thank you for participating in the community.

Kelli Glass

Moderator for Cisco Customer Communities

Highlighted
Cisco Employee

Re: VPN concentrator 3000 series is not shows any console screen

Kelli is correct that this forum is for Cisco AnyConnect but not for any VPN headends.

EOL/EOS for the VPN 3000 Series Concentrators - Cisco shows the last date of HW support is 2012-Aug-31. Please replace it with a Cisco supported product, such as Next-Generation Firewalls (NGFW) - Cisco.


Below might help:

VPN 3000 Console access

Solved: Console Cable - Cisco VPN 3000 Concentr... - Cisco Support Community

Cisco VPN 3000 Concentrator FAQ - Cisco