I am in the position of design a VPN network which include fifteen sites the main site all the fifteen sites will communicate with each other via the main site. I want to be very clear about this. The Cisco products I will deploy at each of the fifteen sites are listed below:
The 1602r for dial up network at each sites incase of the main router fails.
15 1602r with
IP/FW featurePack CD16-CH-12.1.1=
IP PLUS IPSEC 56 FEATURE PACK CD16-CL-12.1.1=
IP/FW PLUS IPSEC 56 FEATURE PACK CD16-CHL-12.1.1=
WITH 2 FLASH MEMORY AS EXTRA EACH.
This is going to be the main router at each sites with its feature
15 1720
CD17-CHK2-12.1.1=
WITH 15 VPN DAUGHTER CARD INCLUDE THE SOFTWARE, MEMORY UPGRADE AND VPN MODULE.
OR
2621
CD26-CHK2-12.07=
WITH 2 WAN INTERFACE CARDS EACH
And the below for the main site with two 7120 for network resillience and redundant .
2 7120
CD71-CHK2-12.0XE=
CISCO7120-4T1
1 WAN INTERFACE CARD EACH.
Please could you advice on the best solution to this.
I believed I'd made right selections for the equipments
Simi