VPN lan to lan and VPNclient support at the same time ?

[Riccardo Veraldi]

Hello I have a 2811 router.

I set up it as a VPN concentrator with VPNclients connecting to it, and I used a IPSec on a stick configuration.

At the same time I'd need to use the same router for Lan-to-Lan IPSec to other 2 different sites.

I can't figure out how to do it since I am using already my 2811 as VPN Hub for VPNclients.

Is there some hint ?

thank you very much

Riccardo

[Jennifer Halim · Accepted solution]

Sure, here is a sample configuration for a router to be configured to  terminate static LAN-to-LAN VPN as well as VPN Client at the same time:

http://www.cisco.com/en/US/products/ps5855/products_configuration_example09186a00809c7171.shtml

And another example for router to be configured to terminate dynamic LAN-to-LAN VPN as well as VPN Client:

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00801dddbb.shtml

Another sample config just on LAN-to-LAN VPN between 2 routers:

http://www.cisco.com/en/US/products/hw/routers/ps221/products_configuration_example09186a008073e078.shtml

Hope that helps.

[Riccardo Veraldi]

thank you very much!