We have a Cisco 5506x that we intend to use purely as a VPN concentrator. We have an external firewall, router, and DHCP server.
We're new to the ASA, but have made pretty good progress setting up our VPN clients. We would like to configure our asa-5506x to tunnel into several different subnets. Each subnet is directly connected to the asa. VPN clients receive correct ip in the dhcp scope assigned by group policy, but are unable to access local resources. We can get one subnet working at a time by setting the default tunnel gateway for VPN traffic, but have been unable to get both routes working at the same time.
For this to work we would need to use a route map, correct? Can anyone provide guidance on how this would work?
Assuming your 5506 is connected to a device on your LAN thats doing dynamic routing (and LAN routing) then simply put in a route to send the remote VPN subnet out through the 5506-X
>>asa-5506x to tunnel into several different subnets.
I typically put firewalls on their own /30 network and connect them to layer 3 switches then this sort of thing is simple to do.
If that's not an option, then you can try PATTING all incoming traffic from your remote VPN subnet so it appears on the network as the IP address of the interface on the 5506-X this is not elegant but it might work for you.
With the enhancements in ISE 3.0 for integrating with Azure AD via SAML IdP, it is now possible to leverage Microsoft Single Sign-On for multiple ISE Portals (for example Sponsor and Guest/BYOD Portals).
At the time of this writing, ISE cann...
With the enhancements in ISE 3.0 for integrating with Azure AD via SAML IdP, it is now possible to create a BYOD Flow to provide Wireless network access using an employee’s Azure AD credentials.
The table below shows the whole Cisco Security solutions + Splunk integrations add-ons. Kindly let me know if I have missed some add-ons or if there are any new updates. Thank you!
Hope this will be helpful for everyone who is looking for Splunk in...
A python based script to generate report if there are disabled rules under an Access Control Policy and an option to delete those rules in bulk.
Step 1 Download the script on PCStep 2 Make sure python3 is installed on PC and have reach...
A python based script to generate report if there are double logging on FMC ACP (logging at beginning and end), having rule action "Allow" or "Trust". (Option1 )
Also, the logging at the begging will be disabled if logging is detected for both beginning ...