01-19-2011 03:03 AM
Hi,
Can any one let me know whether I can establish a VPN between a public and a private IP address. I am planning to do a static NAT of private IP address in the load balancer/router. Will there be any challenges with this kind of setup ? Pls let me know whether anybody deployed the similar setup.
A simple diagram attached here with for reference.
-JP
Solved! Go to Solution.
01-19-2011 03:23 AM
Hi,
This configuration example may prove useful, establishing a VPN tunnel between a public and private IP address via two routers.
http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080094ecd.shtml
Please rate all posts that are helpful.
01-19-2011 03:23 AM
Hi,
This configuration example may prove useful, establishing a VPN tunnel between a public and private IP address via two routers.
http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080094ecd.shtml
Please rate all posts that are helpful.
01-20-2011 01:01 AM
Thank you Sean. The link you provided gives the example with PAT, so it should work with NAT configuration as well. Hope there wont be any practicle problems.
Thank you once again.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide