cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1020
Views
0
Helpful
2
Replies
Highlighted
Beginner

VPN private network with IP Public ?

Hi,

My partner imposes that i create a VPN connexion with CISCO ASA 5505 and send requests by public IP  on my private network.

Is it possible to create NAT rules with this possibility?
Else how can we do?

Thanks.

Mick

Everyone's tags (6)
2 REPLIES 2
Highlighted

Re: VPN private network with IP Public ?

Hi Mikael,

Not sure I fully understand  your request but lets give it a try.

You indicate that you need to stablish a VPN tunnel between your company and partner . It looks to me that your partner requested that you communicate with them through the tunnel with a public IP instead of private   sort of like PATing your private network to a public IP  so that the far end only sees that public IP for their incoming  connections from you ?  if this is so  sure it is posible , the traffic  will only be in one direction meaning that you will be the initiator only,   you can acomplish this by using ASA code feature called Policy NAT, you NAT your internal traffic  based on their destination IP address or network .  

Here is an example link explaining this feature  and how it can be used based on various condictions .

http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/nat_overview.html#wp1088419

I will proceed with an example but please let me know if I have missunderstood your post. 

Regards

Jorge Rodriguez
Highlighted
Beginner

Re: VPN private network with IP Public ?

thank you and sorry for my english.

i think that you understand but the traffic will not only be in one direction

The request (http, ftp, ...) is on entrance and exiting of my private network. My partner must use or filtred public ip only.

I study your response and link.

Thanks.

Mick.