03-07-2012 11:38 PM
Hello !
I'm using a CISCO1921/K9 with IOS 15.1(3)T1 and licensed fetaures ipbasek9, securityk9, datak9, SSL_VPN.
After a working setup of webvpn I'm running in troubles after a reload - of course, the running-config is copied before reload ; )
This config line:
webvpn install svc usbflash0:/webvpn/anyconnect-win-2.5.3055-k9.pkg sequence 1
is missing after a reload. Consequence: the "Anyconnect Client" refuses to connect. What can be the reason? Is it the sequence "1" - I only have one sequence and not more of them? I use this CLI input
webvpn install svc flash:/anyconnect-win-2.5.3055-k9.pkg sequence 1
to install - the line above appears in the running-config output - is this the right way?
Thankfull for hints,
Grüße
Stefan
Solved! Go to Solution.
10-26-2012 09:22 AM
Hello,
Great to hear that,
Please let us know if there is any update.... Set the question as answered so future users can learn from this
10-25-2012 11:01 PM
It was a Bug and is fixed with a following IOS Version ...
10-26-2012 12:03 AM
Hello,
Great, thanks for the update.
Can you let us know the bug ID please?
Also please mark the question as answered so future users can learn from this,
Kudos for the answer
10-26-2012 06:09 AM
Sorry - we had a Cisco-Ticket on this, but at the moment no bug-id to this. After 4 weeks we tried the latest IOS Version and it was fixed there. Maybe in our Ticket System I can catch this information if it's still in the system ...
10-26-2012 09:22 AM
Hello,
Great to hear that,
Please let us know if there is any update.... Set the question as answered so future users can learn from this
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide