06-14-2007 06:35 PM - edited 03-03-2019 05:27 PM
Dea All,
Now i had the problem, could you help me?
1- i had router 2621xm:After i configure int f0/0 than no shut it show message like this:
Router(config)#int f0/0
Router(config-if)#ip add 10.10.10.1 255.255.255.0
Router(config-if)#no shut
*Mar 1 00:00:59.625: %AMDP2_FE-1-INITFAIL: CSR0=0x0000
Router(config)#
------------
by the way on router 2621xm had 2 fastethernet but my router i can see one interface is fastethernet 0/0.
What's going on?
Best Regards,
Join
Solved! Go to Solution.
06-14-2007 06:47 PM
Join
It sounds like a hardware problem. Probably the best thing would be to open a case with Cisco TAC.
HTH
Rick
06-14-2007 06:47 PM
Join
It sounds like a hardware problem. Probably the best thing would be to open a case with Cisco TAC.
HTH
Rick
06-14-2007 07:45 PM
Dear Rick,
Thank you for your reply.
Best Regards,
Join
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide