Cisco WSA LDAPS intégration issue

[ezzaariyouness]

Hello everyone,

I'm trying to configure ldaps authentication On Cisco WSA, but I'm getting the issue attach

can you help me solve this issue. 

[Danilo98]

Thanks for the tip

[amojarra]

Hi @ezzaariyouness 

Maybe its best to take a look at : CSCvx42715 : Bug Search Tool (cisco.com) please and please verify your TLS versions.

Regards,

Amirhossein Mojarrad

+++++++++++++++++++++++++++++++++++++++++++++++++++

++++        If you find this answer helpful, please rate it as such      ++++

+++++++++++++++++++++++++++++++++++++++++++++++++++

[ezzaariyouness]

here is the TSL version on the wsa 

[amojarra]

thank you @ezzaariyouness 

I believe that would be best to take a PCAP and double confirm the connectivity and SSL handshakes.

you can put a filter for both your ADs divide them by "or" in the packet capture section, like :

host 1.1.1.1 or host 2.2.2.2 

Regards,

Amirhossein Mojarrad

+++++++++++++++++++++++++++++++++++++++++++++++++++

++++        If you find this answer helpful, please rate it as such      ++++

+++++++++++++++++++++++++++++++++++++++++++++++++++

[ezzaariyouness · Accepted solution]

Hello,

this issue was related to this bug :  https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwj13235  

the workaround was to create a static route in Management for accessing AD and pointing to Data's Gateway .

Finally, I was able to integrate the WSA with LDAP Servers .