02-09-2010 03:56 AM
Hello,
can someone tell me how to establish an SSH connection from my M650 management appliance to 2 wsa S650?
I have the feature keys but i always get this message when i try to logon:
Error | — | Invalid netstring returned: You are not authorized to login. You are not authorized to login. |
Any ideas?
regards
Solved! Go to Solution.
02-17-2010 10:11 AM
Hi,
This could be due to IP restrictions on who can login to the appliance.
You can try logging into the CLI locally and check for the following:
CLI > adminaccessconfig > IPACCESS
If you see:
Current mode: Restricted
...that would be the reason. You can set IPACCESS to 'ALL' with the same command. After wards you should see:
Current mode: Allow All.
Hope this helps!
Cheers,
Jakob
02-17-2010 10:11 AM
Hi,
This could be due to IP restrictions on who can login to the appliance.
You can try logging into the CLI locally and check for the following:
CLI > adminaccessconfig > IPACCESS
If you see:
Current mode: Restricted
...that would be the reason. You can set IPACCESS to 'ALL' with the same command. After wards you should see:
Current mode: Allow All.
Hope this helps!
Cheers,
Jakob
02-18-2010 12:29 AM
It works.
You are my hero.
regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide