Cisco Unified Wireless IP Phone 7925G, 7921G, 7920 Series

5618

Views

Helpful

Comments

edited on: ‎02-10-2011 ‎03:40 AM

Collaboration Endpoints - Cisco Unified IP Phone 7900 Series

Cisco Unified Wireless IP Phone

Cisco Unified Wireless IP Phone 7925G Series Deployment Guide

Cisco Unified Wireless IP Phone 7921G Deployment Guide

Cisco Unified Wireless IP Phone 7920 Design and Deployment Guide

Please visit Cisco Unified IP Phone 7900 Series home page for all other details

http://www.cisco.com/en/US/products/hw/phones/ps379/tsd_products_support_series_home.html

Cisco Unified IP Phone 7900 Series - Design Guides

Cisco Unified Wireless IP Phone 7926G
- Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Deployment Guide
- Cisco Unified Wireless IP Phone 792xG + Cisco Meraki Wireless LAN Deployment Guide
Cisco Unified Wireless IP Phone 7925G
- Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Deployment Guide
- Cisco Unified Wireless IP Phone 792xG + Cisco Meraki Wireless LAN Deployment Guide
Cisco Unified Wireless IP Phone 7925G-EX
- Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Deployment Guide
- Cisco Unified Wireless IP Phone 792xG + Cisco Meraki Wireless LAN Deployment Guide
Cisco Unified Wireless IP Phone 7921G
- Cisco Unified Wireless IP Phone 7921G Deployment Guide

Latest Contents

Enable Flex Connect mode in WLC

Created by Raj_82 on 05-20-2022 06:34 PM

We have two branch offices and the WAN is connected through IPsec tunnel. Presently those two office has Couple of AP's and it is connected to DC WLC in local- Centralize switching mode. Now we are planning to enable Flex Connect mode to branch... view more

Mobility Express HA

Created by julio.vergara on 05-20-2022 04:32 PM

I am configured HA in mobility Express I have the mobility Express solution working correctly with an AP Master and the rest are slaves. I configure the HA, it takes the role of Mobility Express and everything works fine I turn off the Primary and ever... view more

SW C9200L-48P-4G

Created by picazo on 05-20-2022 03:54 PM

Hi every one! I have this kind of issue, I connected a cable in Cat 2960-CX (trunk) and other side SW C9200L-48P-4G this SW we ready connect 9 access point C9115AXI over POE, one time connected, automatic restart this only C9115AXI' ports...i b... view more

145AC access point... and router?

Created by PhP67 on 05-20-2022 03:17 PM

HiI had been using wireless routers for my home usage, made for the consumer market. I was having reliability issues, so decided to switch to a brand like Cisco and purchase one for my home use.I purchased the 145AC access point, and plugged it downstream... view more

2 APs - 2.4Ghz channels, use somting besides 1,6,11?

Created by wardwolfram on 05-20-2022 02:04 PM

I have 2 Access Points. Much of the readings suggest that one uses channels 1,6 and 11 on the 2.4GHz band. Since I have 2 AP, could not I use a different combination of non-overlapping channels such as:3 & 85 & 10, etc. Am I missing som... view more

Ask a Question

Create

+ Discussion

+ Blog

+ Document

+ Video

+ Project Story

Recognize Your Peers

Spotlight Award Nomination