Need assistance locating the Cisco Aironet devices current version of firmware.
On platforms running VxWorks and Cisco IOS software, the firmware version number for wireless devices appears in the System Software Section .
Additionally for platforms running Cisco IOS, the version can be found by using the Command-Line Interface show version command to display the version, as well as other useful and important information. If using the web browser interface, the version can be found at the top of the home (Summary Status) page.
Hi Please see the below diagram with central dhcp server. Not sure how to define the "central". When we create dynamic interface at wlc, we need to enter dhcp server ip address. Can we say this dhcp server is central dhcp server? otherwise is local dhcp s...
Dear community, I have an AP 1542 outdoor and wlc 3504. The Ap can't join the controller. I keep on getting this error. On the GUI i see radius authorization of the ap has failed. But no Ap policies is enabled! [*10/22/2021 14:09:42....
Hello community, I have an issue with cisco WLC 9800, for wireless users I have 50 vlans, the issue is that when I want to create a Flexprofile it's only support 16 Vlans, there's any solution for this issue. Wireless LAN Controller
Gentsi need CTS inline-tagging enabled on the uplinks of my HA SSO 9800-L-F. sources i found so far referred me to jumbo enablement on the UCS-hosting platform (expectedly using CIMC access :0). failed to find how to access UCS's CIMC on 9800-L-F tho...