cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

WLC9800 - 5GHz only SSID

680
Views
0
Helpful
3
Comments

Hi,

we're running WLC9800 with version 16.12.2s and would like to implement 2,4 and 5 GHz only SSIDs separetely but there seems to be no options for this with the new WLC9800.

 

The closest place I could find is under WLAN configuration  - Radio Policy, see attached photo

 

Any suggestions?

 

 

Comments
Cisco Employee

Radio policy is used to only broadcast and SSID either on 5GHz (select 802.11a) or 2.4GHz (select 802.11g or 802.11bg)

Beginner

Ok, so for example 802.11 will also include 802.11n when used on the 5GHz band? 

Hall of Fame Master
Yes that is correct. Basically like Rafael mentioned, either 2.4 only, 5 only or both.