how to limit traffic by Qos on Wism / 1142AP

Wei Yang · ‎07-04-2011

HI

I have few 1142n ap and register to wism (7.0.98.0)

there are 9 ssid and 9 vlan on wism

there is one ssid and vlan for guest (open with no security policy)

I use qos to limit traffic ( using qos profile brozne)

per-user bandwidth contracts change to ...

average data rate 128, burst data rate 128 , average real-time rate 128 , burst real-time rate 128,

other no change

than go WAN edit guest qos to bronze , wmm policy (allowed)

It is limit guest (per client) download (download a file@ 128kbps-) ,

but upload seems no limit (upload a file @70Mbps-)

I need limit guest per client both download and upload bandwidth @128kbps

any suggestions are welcom

thanks

jiks · ‎07-04-2011

Hi ,

You posted a document not a question. Please post this question in the Discussion area so that someone may help you. I suggest you go back here:

login and Start a discussion under the action menu. Once you have submitted your question, you can delete this document.

Regards,

Jithin

Cisco Support Community Moderator