802.1x on Mobility Express

[nstr1]

I have a Mobility Express, currently my SSIDs with PSK and MAC filtering with that I'm working without any problem.

But now I want to configure a SSID with 802.1x (RADIUS Active Directory)

I came across this guide which I have followed but can't authenticate.

https://www.cisco.com/c/es_mx/support/docs/wireless/mobility-express/210532-WPA2-Enterprise-WLAN-with-Mobility-Expre.html

[nstr1]

And this guide https://www.cisco.com/c/en/us/support/docs/smb/wireless/CB-Wireless-Mesh/2077-Configure-RADIUS-CBW.html

[JPavonM]

Check here your aaa config on the eWLC is fine.

Can you post the aaa configuration you have, and the wlan profile config?

And don't forget to use https://cway.cisco.com/wireless-debug-analyzer/
You can use the radioactive trace output from 9800 in the analyzer.

Consider if you are missing some config in the Cisco ISE.

Try configuring Microsoft NPS to test it using this Cisco guide, it's easier to configure,

[nstr1]

Hi, 

My equipment is a Mobility Express 2800.

Here I show the configuration.

Configuration radius

Configuration WLAN

Test from WLC (When I do the test it shows me fail)