Wireless

Interaja com especialistas para solucionar seus problemas de Wireless. Publique sua pergunta sobre Wireless para obter ajuda.
cancelar
Mostrar resultados para 
Pesquisar em vez de 
Queria dizer: 
cancel
Bem-vindo à Comunidade!
A Comunidade é um hub para se conectar com seus colegas e especialistas da Cisco para pedir ajuda, compartilhar sua experiência, construir sua rede e crescer profissionalmente.
Novo aqui? Clique aqui para aprender mais e começar.

Posts de fórum

Hi,We have been trying to configure the WLC 5508 to work with MS Server 2008 for Radius. We have tried several permutations and conbinations but its adamant not to authenticate.On the WLC, "debug aaa all enable" shows that Radius server is sending th...

We implimented a small 10 ap network recently and all works fine as far as the network being accessable.  The issue comes from the ip:port assignment. Lets say you join to ap number 1 and are assigned ip ( 10.1.1.1:3801 ). then you walk through the w...

Hi guys!I have WLC5508 and ap's models: AIR-LAP1131AG-E-K9, AIR-LAP1131G-E-K9,  AIR-CAP2602E-E-K9, AIR-CAP1602E-E-K9, AIR-CAP3602E-E-K9I am getting next log messages with AIR-LAP1131G-E-K9:*SNMPTask: Jan 04 20:01:53.553: #LOG-4-Q_IND: RRM LOG WARNING...

Yuliya S por Level 1
  • 1120 Apresentações
  • 3 respostas
  • 0 Útil

A company with 460 Cisco Access Points is using iPad Mini's to control lighting and other things, the iPad Mini's are roaming between access points VERY SLOW, they are dropping 45-50 packets between roams. iPad 2's and iPhone's are roaming just fine,...

Hi to everyone,We have a diagram similar to this:User -> AP Aironet -> Cisco WLC -> Radius Server -> Cisco ACS 5.3I want to know if is possible to make a captive portal on the WLC to authenticate against a radius server after ACS validates active dir...

I have some Access Point model AIR-AP1231G-A-K9 with system software version 12.3(8)JED and bootloader version 12.3(2)JA4, I need  change the security to WPA version 2, but this model only have WPA version 1 with TKIP, Could you tell me if I can do a...

Pessoal Boa tarde !Adquiri 2 access pont aironet 3600 da cisco e nao estou conseguir configura-loeu gostaria de estar setando um ip para acessar sua interface grafica, o manual e o material da internet é muito vagoo aironet fica apenas piscando o led...

Prezados,Pretendo disponibilizar em um evento na empresa o acesso para aproximadamente 200 pessoas via rede wireless. Como não tenho essa quantidade de IPs para distribuição, preciso adquirir um roteador wireless que faça NAT.O equipamento RV180W ou ...

Boa tarde,Alguém possui algum procedimento de configuração ou criação de templates para Zabbix baseado em uma consulta SNMP em dispositivos AIR-LAP1041N através de WLC, até aonde li, só é possível se estiverem conectados a WLC.Obrigado!

jeancoelho por Level 1
  • 1089 Apresentações
  • 1 respostas
  • 0 Útil