CMX with Facebook Authentication

[Maurice Ball]

Is it possible to have Cisco CMX to authenticate different floors in a building with different facebook pages?

[mohanak]

If you are asking about template for each floor, then you can.

If you assign a splash template to a building, all the floors defined under that building inherits the splash template. If you have a splash template defined at both building and floor, the floor splash template is used.

http://www.cisco.com/c/en/us/td/docs/wireless/mse/8-0/CMX_Connect_Engage_Visitor_Connect/Guide/Cisco_CMX_Connect_Engage_Config_Guide_VC/CMX_Dashboard_Visitor_Connect.html#98526

[Maurice Ball]

You will see in the attached image I have two different facebook pages associated with different floors in different buildings. The Mondo Resturant & Bar facebook page is associated with the Mondo Restaurant floor that is configured in CMX and the Sandnes Sparebank facebook page is associated with the Sandnes Sparebank floor that is configured in CMX. The problem I am having is althought the SandnesSpareBankFloor1 floor in CMX is associated with the Sandnes Sparebank facebook page it´s not being associated to the correct facebook page. When I connect to that access point which is located on that floor the user only gets the default Facebook page that is configured in CMX which is the Mondo facebook page. Is it possible to configure CMX to use two different facebook pages on two different floors?