How to change vlan when the user is authenticated

anacucala · ‎08-10-2011

I have a wlan with web authentication and I want to use two vlan, one for the users that are trying to authenticate and I want to pass the users to another vlan when the users will be authenticated.

Thanks,

Nicolas Darchis · ‎08-13-2011

You cannot.

But what is the goal you are trying to achieve with that ?

Anyway the clients that are not authenticated yet cannot pass traffic on the network so there's no real added value to what you are trying to do ...

George Stefanick · ‎08-14-2011

Sounds like you want to have a "drop vlan" where you can posture the user based on their ID. Then move the user to his / her specific VLAN?

If so, here is a config example for dynamic vlans:

http://www.cisco.com/en/US/customer/products/ps6366/products_configuration_example09186a00808c9bd1.shtml

"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
___________________________________________________________

Nicolas Darchis · ‎08-14-2011

@George : For dot1x yes, but the question was for webauth. And you cannot change the vlan of a client after authentication in webauth since you would be changing his ip.