Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello guys,I'm Kevin, an engineer from this beautiful country called Panama. We're little in territory, but big in heart. I'm working with Cisco productos around more than 13 Years. I have the CCNA, CCNP Enterprise, CCNP SP and CCIE Enterprise certif...
Hi everyone,I want to know if is it possible to configure QoS on a 4500 Sup7 on a Layer 3 routed port like the following example (Similar to CBWFQ on IOS Router)?
Switch(config)# configure terminal
Switch(config)# policy-map policy11
Switch(config...
Hi Maik, I had the same issue, but I did a workaround. Replace the following sentences in your genie_parsers.robot file. But... I would like to know if exist that particular way to call genie parse command with direct access to the library. execute a...
Hi Sundeep Dsouza
Could you resolve your issue?
I could see the following with the info of your debug:
- You have a SVI Vlan 155 with IP address 172.13.1.2
- Inside the SVI 155 you had configured two IP helper-address: 192.168.11.10 and 192.1...
Checking this DHCP case issue, the reason is because the DHCP server is allocating those devices as Static and assign a large number in Renewal time and Rebind time.
My case (Autonomous AP 3502 IOS Version 15.2(4)JB6):
*Jul 8 08:05:16.088: DHCP: Tr...
Hi,
I had the same issue messages like "Error Download updates failed: Unable to connect to update server"
I did the activation through wizard asdm and that way it did not send dns information for SourceFire module (Not requested either). Also NTP s...
