|
DEBUG> wlancli show contscan_config
ContScan config: pace = 4, interval = 2000, dfs = 1, rssi = 67
OK
DEBUG> wlancli show current_ap
ret 6
ret 6
AP Info:
SSID: uctac10, AP Name:APc067.af58.bcb, MAC Address: e8:ed:f3:61:26:3f
Frequency: 5.240Ghz, Current Channel: 48
Last RSSI: -52, Beacon Interval: 102
ieeeCaps: (0x1111) [ESS][PRIV][SPECTRUM][RADIOMEA]
Basic Rates: 12
OptionalRates: 18 24 36 48 54
DTIM Period: 2
Country Code: JP, Environment: Indoor/Outdoor
Channels [36 - 64] @ 22 dBm
Channels [100 - 140] @ 20 dBm
Power Constraint: 0dBm, Power Limit: 16dBm
Channel Utilization: 1%, Station Count: 1, Admission Capacity: 23437
caps: [WMM][CAC VO][UAPSD][PRXARP][WPA2][11n]
AC: Best Effort
Admission Control: No, AISFN: 3, ECWMin: 4, ECWMax: 10, TXOpLimit: 0
AC: Background
Admission Control: No, AISFN: 7, ECWMin: 4, ECWMax: 10, TXOpLimit: 0
AC: Video
Admission Control: No, AISFN: 2, ECWMin: 3, ECWMax: 4, TXOpLimit: 94
AC: Voice
Admission Control: Yes, AISFN: 2, ECWMin: 2, ECWMax: 3, TXOpLimit: 47
CCX Version: 5
OK
DEBUG> wlancli show neighbor_list
ret 6
ret 6
<version,nl-1.0>
<ssid,uctac10>
<channel,48><name,APc067.af58.bcb><bssid,e8:ed:f3:61:26:3f><rssi,-52><cu,1>
<channel,40><name,APc067.af58.bcd><bssid,e8:ed:f3:61:28:7f><rssi,-51><cu,5>
OK
DEBUG> wlancli show profile profile-index 0
ret 6
ret 6
name = uctac10
index = 0
enabled = 1
connected = 1
network_id = 0
status = Allowed
source = local
ssid = uctac10
band = Auto
security_type = PSK
powerSaveOnCall = 1
dhcp_enabled = 1
alt_tftp_enabled = 0
passphrase = *
OK
DEBUG> wlancli show roaming_report
******** Succ ROAMING_HANDOVERS ********
- Differential RSSI = 36
- MAX TX retries = 0
- TSPEC = 0
- BSS Loss TX = 0
- Switch Channel = 0
- AP Disconnect = 40
- SEC attack = 2
******** ROAMING STATISTICS ********
- Last roam duration = 158
- Num of succesful handovers = 38
- Succesful total handover duration = 14243252
- Succesful total roaming duration = 441169349
- Num of unsuccessful handovers = 21
OK
DEBUG> wlancli show site_survey_result
AP Info:
SSID: uctac10, AP Name:APc067.af58.bcd, MAC Address: e8:ed:f3:61:28:7f
Frequency: 5.200Ghz, Current Channel: 40
Last RSSI: -50, Beacon Interval: 102
ieeeCaps: (0x1111) [ESS][PRIV][SPECTRUM][RADIOMEA]
Basic Rates: 12
OptionalRates: 18 24 36 48 54
DTIM Period: 2
Country Code: JP, Environment: Indoor/Outdoor
Channels [36 - 64] @ 22 dBm
Channels [100 - 140] @ 20 dBm
Power Constraint: 0dBm, Power Limit: 16dBm
Channel Utilization: 1%, Station Count: 3, Admission Capacity: 23437
caps: [WMM][CAC VO][UAPSD][PRXARP][WPA2][11n]
AC: Best Effort
Admission Control: No, AISFN: 3, ECWMin: 4, ECWMax: 10, TXOpLimit: 0
AC: Background
Admission Control: No, AISFN: 7, ECWMin: 4, ECWMax: 10, TXOpLimit: 0
AC: Video
Admission Control: No, AISFN: 2, ECWMin: 3, ECWMax: 4, TXOpLimit: 94
AC: Voice
Admission Control: Yes, AISFN: 2, ECWMin: 2, ECWMax: 3, TXOpLimit: 47
CCX Version: 5
AP Info:
SSID: uctac10, AP Name:APc067.af58.bcb, MAC Address: e8:ed:f3:61:26:3f
Frequency: 5.240Ghz, Current Channel: 48
Last RSSI: -52, Beacon Interval: 102
ieeeCaps: (0x1111) [ESS][PRIV][SPECTRUM][RADIOMEA]
Basic Rates: 12
OptionalRates: 18 24 36 48 54
DTIM Period: 2
Country Code: JP, Environment: Indoor/Outdoor
Channels [36 - 64] @ 22 dBm
Channels [100 - 140] @ 20 dBm
Power Constraint: 0dBm, Power Limit: 16dBm
Channel Utilization: 7%, Station Count: 1, Admission Capacity: 23437
caps: [WMM][CAC VO][UAPSD][PRXARP][WPA2][11n]
AC: Best Effort
Admission Control: No, AISFN: 3, ECWMin: 4, ECWMax: 10, TXOpLimit: 0
AC: Background
Admission Control: No, AISFN: 7, ECWMin: 4, ECWMax: 10, TXOpLimit: 0
AC: Video
Admission Control: No, AISFN: 2, ECWMin: 3, ECWMax: 4, TXOpLimit: 94
AC: Voice
Admission Control: Yes, AISFN: 2, ECWMin: 2, ECWMax: 3, TXOpLimit: 47
CCX Version: 5
OK
DEBUG> wlancli show supplicant status
ret 6
ret 6
bssid=e8:ed:f3:61:26:3f
ssid=uctac10
id=0
mode=station
pairwise_cipher=CCMP
group_cipher=TKIP
key_mgmt=WPA2-PSK
wpa_state=COMPLETED
ip_address=192.168.3.220
address=00:eb:d5:db:00:20
OK
DEBUG> wlancli show user_cert_info
ret 6
ret 6
get user cert failed!
DEBUG> wlancli show wlan_scan_mode
Scan Mode: CONTINUOUS
OK
DEBUG> wlancli show wlan_stat
ret 6
ret 6
NetDevice stats:
tx_bytes: 0
rx_bytes: 0
tx_pkts: 16568486
rx_pkts: 1515245
tx_pkts_dropped: 0
rx_pkts_dropped: 0
tx_pkts_err: 0
rx_pkts_err: 0
Firmware stats:
mcast_tx_frame: 1983968
failed: 1684
retry: 4465253
multi_retry: 942987
frame_dup: 409142
rts_success: 4032640
rts_failure: 342589
ack_failure: 5490614
rx_frag: 10411025
mcast_rx_frame: 28770
fcs_error: 3682432
tx_frame: 6508181
Roaming stats:
success current/total: 2/76
failure current/total: 0/21
OK
|
