取消
显示结果 
搜索替代 
您的意思是: 
cancel
公告

December 2020

【原创】两种电话恢复出厂设置的方法

2225
查看次数
58
有帮助
3
评论
"123456789*0#"
"3491672850*#"

 

"1234" - Used to behave differently, it would format flash completely.
It was changed for various reasons and now essential cleans up flash
and goes out and ask for the exact same load it had before. So if you
were running 6.0(2)SR1 it would go and try and reload 6.0(2)SR1.

 

"349" - Essentially replaces the old functionality of 1234. This
sequence does format flash and causes the phone to come up and ask for
Term70.default.loads. So you have to follow the rules for
this and make sure you are on a DHCP enabled network, have the right TFTP server set
in Option 150 and most importantly that you have a valid
Term70.default.loads and matching application files on that
TFTP server.

 

***特别标注: 第二种方法不要轻易推荐给客户使用,可能直接损坏硬件****

 

评论
Jim—Jin
Cisco Employee
超哥NBlol:lol
SMG-SH
Rising star
知道第一种
yangkai_716
Collaborator
很实用的tips,感谢楼主分享
Content for Community-Ad