本帖最后由 lingyu-cheng 于 2016-12-29 16:12 编辑 配置了aa之后，拨打电话无提示音，拨分机号是能通的。
配置如下，求大神指点。
application
service aa flash:its-CISCO.2.0.2.0.tcl
paramspace english index 1
param operator 8817
paramspace english language en
paramspace english location flash:
paramspace english prefix en
param welcome-prompt en_welcome.au
param max-extension-length 4
param aa-pilot 3333
!
!voice-port 0/1/0
trunk-group CHN 4
supervisory disconnect dualtone mid-call
supervisory answer dualtone
supervisory custom-cptone CN_Tone
supervisory dualtone-detect-params 450
no battery-reversal
input gain 4
output attenuation -2
cptone CN
timeouts interdigit 5
timeouts call-disconnect 0
timeouts ringing 5
timeouts wait-release 1
connection plar 3333
caller-id enable
!
!
dial-peer voice 1 pots
service aa
incoming called-number .
direct-inward-dial
port 0/1/0
!
Flash中文件：
Directory of flash:/
1 -rw- 30102160 Dec 28 2016 17:50:10 +08:00 uc500-advipservicesk9-mz.124-22.YB2.bin
2 -rw- 660 Dec 28 2016 19:38:12 +08:00 vlan.dat
3 -rw- 69603 Dec 29 2016 14:43:50 +08:00 en_welcome.au
4 -rw- 7156 Dec 29 2016 14:49:12 +08:00 its-CISCO.2.0.2.0.tcl
5 -rw- 496521 Dec 29 2016 15:13:42 +08:00 music-on-hold.au
