10-23-2021 08:11 AM
In Internet Explorer after downloading the add-on "PlayerPT Control" and "Cisco210Viewer Control", the images on the Linksys WVC200 and WVC210 cameras could be seen without any problems.
What kind of solution is there for Chrome and Edge in order to be able to enjoy these cameras as well as in IE?
Many thanks for the help,
Andreas
Solved! Go to Solution.
10-30-2021 06:50 AM
Hi there Kasun,
Thank you for the IE tab idea.
After adding the IE-Tab application to Chrome and Edge as extension and installing the necessary ietabhelper.exe, the images appear in both browsers from the two Linksys IP PTZ cameras WVC200 and WVC210.
But, you can operate in the IE-Tab only the WVC200.
The free IE-Tab app is by no means a hundred percent solution, but until something better doesn't come up, you have to live with it.
KR,
Andreas
10-23-2021 09:20 AM
i did not tested this in your scenario. but try IE simulation in chrome with below extension.
https://chrome.google.com/webstore/detail/ie-tab/hehijbfgiekmjfkfjpbkbammjbdenadd
rate and mark as answer if this solved your concern
10-30-2021 06:50 AM
Hi there Kasun,
Thank you for the IE tab idea.
After adding the IE-Tab application to Chrome and Edge as extension and installing the necessary ietabhelper.exe, the images appear in both browsers from the two Linksys IP PTZ cameras WVC200 and WVC210.
But, you can operate in the IE-Tab only the WVC200.
The free IE-Tab app is by no means a hundred percent solution, but until something better doesn't come up, you have to live with it.
KR,
Andreas
11-12-2024 02:10 PM
I am looking for firmware for wvc210
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide