First would be to make sure you have the right scope selected when looking at the flow search. If you don’t have the right scope, the expected data will not show up.
Next, check the Inventory page. There, filter out for the IP address of the sensor host (again, check the scope you are in) and see when the last check-in is for the sensor. You should see something the last check-in time within the last hour. If it has not checked in, then you will need to check from the server where the server is installed.
From the sensor, if this is linux server, check that the directory /usr/local/tet/ exists. If the directory is not there, make sure that the sensor was installed and that there was no issue when installing the rpm. rpm -qa | grep tet should show you what is installed if it is.
If the directory is there, check the sensor_id file in that location. If you see some content that begins with “uuid”, this means that after the rpm was deployed, it was not able to communicate back to the cluster. Run the fetch_sensor_id.sh file and then check the fetch_sensor_id.log file in /usr/local/tet/log and see what issues occurred in getting the sensor ID. This should help narrow down what is going on.
The new Cisco Intersight cloud operations platform can help bring order to your hybrid IT world by bridging on-premises and public cloud infrastructure, workloads, and apps.
Get the full story in our next webinar on Nov. 17th. Regist...
Introducing the simplest hybrid cloud platform
Application and infrastructure management can get complicated in a hybrid IT world.Take back control once and for all with the newly expanded Cisco Intersight — the cloud operations platfo...
Hello,I understand that Contracts in ACI that are enfored by the leafs are stateless ACL. When is an ACI Contract stateful?- as far as I know when using AVS/AVE?- what about when using Kubernetes/Openstack integration with ovs?
*This event has been rescheduled for causes beyond our control, we appreciate your understanding.
[ The link to the discussion will be published on December 7th ]
This event is an opportunity to have your questions answered on tools available for Nexus 30...
I'm having a strange problem redistributing iBGP routes to OSPF on Nexus 9000. Initially I had an open prefix list to get things working. Some of the routes weren't being redistributed to OSPF and I found this article which helped which said you nee...