ACI : How to manage tag and untagged vlan

[yoshi.s]

Hello

Can I use a tag and an untagged van on the same EPG?
Is this configuration supported?

Ex...
EPG-A > Static Port: tag vlan100
EPG-A > Static Port: untagged vlan100

If not, how do I manage the tag and the untagged vlan?

I'm looking for reference document.

Best Regards,
Yoshi

[Jason Williams · Accepted solution]

Hi Yoshi, 

I would recommend that you check out the link below.

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/aci-fundamentals/b_ACI-Fundamentals/b_ACI-Fundamentals_chapter_010001.html#concept_450C8C73C1DE4A4EAF6390E862BD9952

JW

[yoshi.s]

Thanks Jason,

I solved the problem.

Best regards,

Yoshi

[jalozano9]

hello yoshi, could you share how did you solved the problem, we have the same issuee 

we will appreciate it

thanks