05-08-2023 07:22 AM
Hello All,
What is the difference between L4-L7 service insertions using standard way and policy based redirect ? By standard way I mean applying the service graph template to contract:
And the other wau by using PBR:
Solved! Go to Solution.
05-23-2023 01:27 AM
Hi Hefe2,
I have found the infrmation I need from following link: https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric-infrastructure/white-paper-c11-739971.html For PBR you don't need shadow EPG or connector has to be in either comsumer BD or provider BD
Regards,
An
05-23-2023 01:07 AM
Hi,
there is no "other way". Under "L4-L7 Policy-Based-Redirect" you create the PBR Device which is reused when the Service Graph is deployed.
Regards
05-23-2023 01:27 AM
Hi Hefe2,
I have found the infrmation I need from following link: https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric-infrastructure/white-paper-c11-739971.html For PBR you don't need shadow EPG or connector has to be in either comsumer BD or provider BD
Regards,
An
05-23-2023 01:57 AM
Hi,
yes, there´s no need for an EPG. As you already mentioned you just need to select the corresponding BD in the Service Graph deployment wizard.
Regards
05-23-2023 02:10 AM
If you don't use PBR, then you would need
05-23-2023 02:31 AM
If you don´t to use PBR, you need an EPG to connect an external Device as L3 GW for firewalling,etc
Feel free to contact me directly if you have any ACI relevant questions/topics to discuss
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide