11-19-2020 08:13 AM
Hello guys.
I would like to know if when creating the fabrics on a Multi-Site environment, is it possible to use the same BD Multicast pool on both sides or should it be different?
Planning on using the same 225.0.0.0/15 range on both sides.
Solved! Go to Solution.
11-19-2020 11:40 AM - edited 11-19-2020 11:41 AM
Hi @Fernando Hernández ,
when creating the fabrics on a Multi-Site environment, is it possible to use the same BD Multicast pool on both sides or should it be different?
Yes it is. I have done it. When multicasts go from one site to the other they end up at the O-MTEP (Overlay-Multicast Tunnel End Point) of the other site and placed on the appropriate Multicast Tree for that site.
I hope this helps.
Don't forget to mark answers as correct if it solves your problem. This helps others find the correct answer if they search for the same problem.
11-19-2020 11:40 AM - edited 11-19-2020 11:41 AM
Hi @Fernando Hernández ,
when creating the fabrics on a Multi-Site environment, is it possible to use the same BD Multicast pool on both sides or should it be different?
Yes it is. I have done it. When multicasts go from one site to the other they end up at the O-MTEP (Overlay-Multicast Tunnel End Point) of the other site and placed on the appropriate Multicast Tree for that site.
I hope this helps.
Don't forget to mark answers as correct if it solves your problem. This helps others find the correct answer if they search for the same problem.
11-19-2020 01:30 PM
Nice.
We did it on a lab environment, but wanted to be sure cause now we are going to do it on a real productive environment.
Thanks for the help.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide