04-23-2018 11:36 PM - edited 03-01-2019 05:31 AM
Hello,
I have a cluster of 3 APICs (APIC-CLUSTER-M2).
I want to change the 3 medium APICs to the large APICS (APIC-CLUSTER-L2)
Can I add the new APICs to the cluster and then remove the old ones? or is there another way to change the APICs without affecting the network.
Solved! Go to Solution.
04-25-2018 01:06 PM
Hey Ziad,
I would recommend replacing the APICs one at a time instead of increasing the cluster size. Ensure the cluster is fully fit prior to decommission/recommission of each APIC. You can follow the below link for steps on replacing an APIC
This will not impact data plane traffic in the fabric
04-25-2018 01:06 PM
Hey Ziad,
I would recommend replacing the APICs one at a time instead of increasing the cluster size. Ensure the cluster is fully fit prior to decommission/recommission of each APIC. You can follow the below link for steps on replacing an APIC
This will not impact data plane traffic in the fabric
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: