08-12-2021 09:00 AM
Our DNS team is asking us to add a static route for their Infoblox deployment
i.e
BD = 192.168.1.1/24
Appliance = 192.168.1.10
HA Loopback = 192.168.1.11
They cannot turn on Proxy ARP on their Infoblox appliance and are asking for the following static route:
192.168.1.11/32 next-hop 192.168.1.10
Should I just do this under the EPG or under the L3Out nodes?
Solved! Go to Solution.
08-14-2021 11:42 PM
Since your HA Loopback IP is part of the BD subnet, you can't add it as a static route in a L3Out.
However, you can add it as a /32 route under the EPG and mark it as EP Reachability:
Stay safe,
Sergiu
08-14-2021 02:06 PM - edited 08-14-2021 02:08 PM
Static routes are added on L3out on the leaf node profiles.
You can check current routing before adding it and after adding it on cli to confirm if there was a change made.
08-14-2021 11:42 PM
Since your HA Loopback IP is part of the BD subnet, you can't add it as a static route in a L3Out.
However, you can add it as a /32 route under the EPG and mark it as EP Reachability:
Stay safe,
Sergiu
08-15-2021 12:45 AM
Can you please explain to me the reason for having an HA loopback. What is the use of it?.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide