cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1313
Views
0
Helpful
1
Replies

Cisco ACI IPv6

saurav.khanna
Level 1
Level 1

I have a muti-pod golf router setup. I have some IPv6 enabled machines on my lan that are connected with ACI leaf switches. I need to make them available on Golf. So, question is how do I send an IPv6 advertisement from my ACI to golf.

 

I have collapsed the functionality of my IPN and Golf into the same router. Attached with the post is my basic setup.

 

When I try and export IPv6 I do see the advertisement in my IPN/Golf router but it is not installed:

BGP routing table entry for [5][222.222.222.222:4][0][64][2001:920:C002:12::]/29, version 6492
Paths: (1 available, best #1, table EVPN-BGP-Table)
Advertised to update-groups:
3
Refresh Epoch 1
65001, (received & used)
10.244.0.35 (metric 20) (via default) from 222.222.222.222 (222.222.222.222)
Origin IGP, localpref 100, valid, external, best
EVPN ESI: 00000000000000000000, Gateway Address: ::, VNI Label 2260994, MPLS VPN Label 0
Extended Community: SoO:65001:33554415 RT:999:5333 ENCAP:8
Router MAC:0200.0AF4.0023
rx pathid: 0, tx pathid: 0x0

1 Reply 1

saurav.khanna
Level 1
Level 1
Vesrion is:
APIC 3.1(i)
Spine and leaf: 13.1
IPN: 16.09.03
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Save 25% on Day-2 Operations Add-On License