04-14-2016 09:38 PM - edited 03-01-2019 04:56 AM
Dear All Experts,
I want to setup a Cisco ACI LAB setup for testing and demo.
The components to be used for the LAB are:
1. Cisco N9K Spine switches --- 2 no's
2. Cisco N9K Leaf switches --- 2 no's
3. Cisco APIC-M2 --- 1 no
Once Physical connectivity will be completed what is next?
What initial configuration required to be done on Spine & Leaf switches and on APIC? Is there any document guiding step by step configuration, please suggest.
I am novice for Cisco ACI hence during the LAB testing I need your help.
Hopping for a positive response.
Regards
04-15-2016 05:54 AM
Hello
Thanks for using SupportForums
Please review the following article
There are also good resources here:
if you have any questions or problems please reply to the thread!
04-18-2016 09:07 PM
Hi dpita,
Thanks for sharing the details.
Can you help from where I should start to enter in to SDN and cloud technology?
I am novice for this things I am from core networking background.
It will help to deep dive in these new technologies.
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide