05-07-2018 06:21 AM - edited 03-01-2019 05:32 AM
dear all,
currently i have an issue with my customer endpoint that connected to 2 aci leafs using vpc. the endpoint is a virtual machine which is reside in blade server (non cisco). the hypervisor is vmware esxi and only use a vss. i have configured the aci leaf port facing down to blade server as a static vpc port for an epg and it is using the same vlan encapsulation that the vm used/attached on vmware vss. the epg is associated with bridge domain which has associated subnet with it. the problem is when i do the ping from vm to the gateway the result is intermittent. what should i do or check to solve this issue?
thankyou,
adhie
05-07-2018 10:21 AM
Insure that within ACI, the port-channel load-balancing mode is set to MAC pinning
05-07-2018 10:40 AM
brumer,
is it under interface policies??
05-07-2018 10:54 AM
Its under your interface policy group.
05-07-2018 08:20 PM
burmer,
i already do that and still experiencing an intermittent connectivity,
05-08-2018 06:01 AM
Check the load-balancing type on the VMWare switch (DVS or Standard Switch) and make sure its 'Based on Originating Virtual Port.' Also make sure that the correct physical NICs are bound to the VMWare switch.
Whats the server hardware?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide