Get FDB table via SNMP in Cisco ACI

[dmytro.i.morozov]

Hello,

Is it possible to get  FDB table via SNMP in Cisco ACI?

Regards,

Dmytro Morozov

[Tomas de Leon]

Dmytro Morozov,

The bridge-mib is not supported in ACI.

MIBs Supported by Leaf and Spine Switches
http://www.cisco.com/c/dam/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/mib/list/mib-support.html

Additional information here:

Technote: SNMP in the ACI Fabric
https://supportforums.cisco.com/document/12961146/technote-snmp-aci-fabric

Ask the ACI Experts: SNMP in the ACI Fabric
https://supportforums.cisco.com/blog/13100731/ask-aci-experts-snmp-aci-fabric

Thank you for participating in the Cisco Support Forum for ACI! If you have other questions related to this post, please let us know. If this response answers your questions, please mark this post "answered" and assign a rating to the response(s) provided. This will help notify other viewers that your question(s) is answered and this helps us provide better responses for this and future questions.

Thank you!

T.

[dmytro.i.morozov]

Thank you for your answer.

Is it possible to get a list of learned MAC addresses  or MACs of directly connected devices from other table via snmp?

Regards,

Dmytro Morozov

[Tomas de Leon]

Dmytro Morozov,

If you run a "snmp walk" against the switches you will see what values can be retrieved.  You can write a script to ssh to each leaf and capture the results from a "show mac address-table".

T.