Hi team,
I have a new switch N9K-C9364C. I'm trying to add it as a spine switch. But it dosen't show up in the APIC. It seems to be a physical connection problem. I tried changing the cable dac, but it didn't help. What other problems could there be?
I did some basic diagnostics and saw the following:
(none)# show discoveryissues
================================================================================
Check 1 Platform Type
================================================================================
Test01 Retrieving Node Role PASSED
[Info] Current node role: SPINE
[Info] Please check CH09 DHCP status section for configured node role
================================================================================
Check 2 FPGA/BIOS in sync test
================================================================================
Test01 FPGA version check PASSED
[Info] No issues found for FPGA versions
Test02 BIOS version check PASSED
[Info] No issues found for BIOS versions
================================================================================
Check 3 HW Modules Check
================================================================================
Test01 Fans status check PASSED
[Info] All fans status is ok
Test02 Power Supply status check PASSED
[Info] All PSUs status is ok
Test03 Fan Tray status check PASSED
[Info] All FanTrays status is ok
Test04 Line Card status check PASSED
[Info] All LineCard status is ok
================================================================================
Check 4 Node Version
================================================================================
Test01 Check Current Version PASSED
[Info] Node current running version is : n9000-16.0(2h)
================================================================================
Check 5 System State
================================================================================
Test01 Check System State FAILED
[Warn] Top System State is : out-of-service
[Info] Node upgrade is in notscheduled state
================================================================================
Check 6 Updated LLDP Adjacencies
================================================================================
Port: eth1/64
Test02 Wiring Issues Check PASSED
[Info] No Wiring Issues detected
Test03 Port Types Check PASSED
[Info] No issues with port type, type is:fab
Test04 Port Mode Check PASSED
[Info] No issues with port mode, type is:routed
Test02 Adjacency Check PASSED
[Info] Adjacency detected with leaf
================================================================================
Check 7 BootStrap Status
================================================================================
Test01 Check Bootstrap/L3Out config download FAILED
[Warn] BootStrap/L3OutConfig URL not found
[Info] Ignore this if this node is not an IPN attached device
================================================================================
Check 8 Infra VLAN Check
================================================================================
Test01 Check if infra VLAN is received PASSED
[Info] Infra VLAN received is : 3914
Test02 Check if infra VLAN is deployed SKIPPED
[Info] No ctrlr adjacency detected. Skipping infra VLAN deployed check
================================================================================
Check 9 DHCP Status
================================================================================
Test01 Check Node Id FAILED
[Error] Valid Node Id not received via DHCP response
Test02 Check Node Name FAILED
[Error] Valid Node name not revevied via DHCP
Test03 Check TEP IP FAILED
[Error] Valid TEP IP not revevied via DHCP
Test04 Check Configured Node Role FAILED
[Error] Valid Node Role not received via DHCP response
Test05 DHCP Msg Stats FAILED
[Info] Total DHCP discover sent by switch : 636
[Error] Cannot retrive DHCP offer stats
[Error] Cannot retrive DHCP request stats
[Error] Cannot retrive DHCP ACK stats
[Fatal-Error] Please check DHCP issues...Aborting command execution
(none)# moquery -c faultInfo
# fault.Inst
code : F1394
ack : no
alert : no
annotation :
cause : interface-physical-down
changeSet : lastLinkStChg (New: 2024-01-10T10:53:54.681+00:00), operBitset (New: 3-4), operSt (New: up), operStQual (New: none), resetCtr (New: 2)
childAction :
created : 2024-01-10T10:40:27.045+00:00
delegated : no
descr : Port is down, reason:linkNotConnected(connected), used by:Fabric
dn : sys/phys-[eth1/64]/phys/fault-F1394
domain : access
extMngdBy : undefined
highestSeverity : minor
lastTransition : 2024-01-10T10:53:54.685+00:00
lc : raised-clearing
modTs : never
occur : 1
origSeverity : minor
prevSeverity : minor
rn : fault-F1394
rule : ethpm-if-port-down-fabric
severity : minor
status :
subject : port-down
title :
type : communications
uid :
userdom : all
(none)# show interface eth1/64
Ethernet1/64 is up
admin state is up, Dedicated Interface
Hardware: 10000/100000/40000 Ethernet, address: 0000.0000.0000 (bia d4e8.8068.70c8)
MTU 9366 bytes, BW 40000000 Kbit, DLY 1 usec
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, medium is broadcast
Port mode is routed
full-duplex, 40 Gb/s, media type is 40G
FEC (forward-error-correction) : disable-fec
Beacon is turned off
Auto-Negotiation is turned on
Input flow-control is off, output flow-control is off
Auto-mdix is turned off
Rate mode is dedicated
Switchport monitor is off
EtherType is 0x8100
EEE (efficient-ethernet) : n/a
Last link flapped 00:02:04
Last clearing of "show interface" counters never
2 interface resets
30 seconds input rate 0 bits/sec, 0 packets/sec
30 seconds output rate 0 bits/sec, 0 packets/sec
Load-Interval #2: 5 minute (300 seconds)
input rate 0 bps, 0 pps; output rate 0 bps, 0 pps
L3 in Switched:
ucast: 0 pkts, 0 bytes - mcast: 0 pkts, 0 bytes
L3 out Switched:
ucast: 0 pkts, 0 bytes - mcast: 0 pkts, 0 bytes
RX
0 unicast packets 473 multicast packets 0 broadcast packets
473 input packets 184426 bytes
0 jumbo packets 0 storm suppression bytes
0 runts 0 giants 0 CRC 0 Stomped CRC 0 no buffer
0 input error 0 short frame 0 overrun 0 underrun 0 ignored
0 watchdog 0 bad etype drop 0 bad proto drop 0 if down drop
0 input with dribble 0 input discard
0 input buffer drop 0 input total drop
0 Rx pause
TX
0 unicast packets 463 multicast packets 1126 broadcast packets
1589 output packets 583891 bytes
0 jumbo packets
0 output error 0 collision 0 deferred 0 late collision
0 lost carrier 0 no carrier 0 babble 0 output discard
0 output buffer drops 0 output total drops
0 Tx pause
(none)# show interface eth1/64 status
------------------------------------------------------------------------------------------------
Port Name Status Vlan Duplex Speed Type
------------------------------------------------------------------------------------------------
Eth1/64 -- connected routed full 40G QSFP-H40G-CU1M
(none)# show interface eth1/64 transceiver
Ethernet1/64
transceiver is present
type is QSFP-H40G-CU1M
name is CISCO
part number is 2231254-1
revision is B
serial number is TED1939K04H-B
nominal bitrate is 10300 MBit/sec per channel
Link length supported for cable assembly is 1 m
cisco id is -- 13
cisco extended id number is 16
cisco part number is 37-1322-02
cisco product id is QSFP-H40G-CU1M
cisco vendor id is V02
DOM is Disabled
(none)# show interface eth1/64 transceiver details
Ethernet1/64
transceiver is present
type is QSFP-H40G-CU1M
name is CISCO
part number is 2231254-1
revision is B
serial number is TED1939K04H-B
nominal bitrate is 10300 MBit/sec per channel
Link length supported for cable assembly is 1 m
cisco id is -- 13
cisco extended id number is 16
cisco part number is 37-1322-02
cisco product id is QSFP-H40G-CU1M
cisco vendor id is V02
DOM is Disabled
DOM info not available
