05-24-2022 02:29 PM - edited 05-24-2022 02:32 PM
Hi Experts ,
We are facing an communication issue during replication(backup) between 2 servers SERVER-01 and SERVER-02 .
SERVER-01 is a production server and SERVER02 is backup server . May be during the backup the communication fails .
We had CRC errors/input errors on the Switch side . After reseating the Fiber cable and SFP ports , We are not observing any CRC error . But the initial issue reported by server team is till there .
on the switch interface within vpc only one interface has input traffic and on other interface the input rate is 0 . So when we checked the graph in solarwinds ,We observed that during the backup (time 02:15 CET to 02:30 CET) , the receive traffic on eth1/14 LEAF101 switch has 101GB of Bytes received but on LEAF102 it's just 5KB of received Bytes ...
On other side transferred Bytes on LEAF205 eth1/22 interface is 95 MB and transferred Bytes on LEAF206 eth1/22 interface is 107Gb ..?
when the traffic reaches POD-2 why it is not load shared between LEAF205 and LEAF206 ? Is there any issue here or it is how the port-channel or Vpc interfaces should work ???
05-25-2022 05:06 AM
This sounds like a similar question to the other you posted. If so, please continue with that thread so we're not duplicating efforts: https://community.cisco.com/t5/application-centric/only-one-vpc-interface-is-used-for-communication/m-p/4607660#M12263
Robert
05-25-2022 10:32 AM
DONE.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide