Remote Leaf Uplink interfaces

[AirBorn]

Hello Experts

Does  Remote leaf uplinks supports 1GE GLC-T modules?

Regards

[Robert Burns]

https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric-infrastructure/white-paper-c11-740861.html

"A minimum of 100 Mbps bandwidth in the IP Network. Starting from Cisco ACI Release 4.2.4, the requirement has been lowered to 10 Mbps of bandwidth."

Robert

[Robert Burns]

You'd have to ensure the uplink ports of the platform support a 1G GLC adapter.  

Robert

[AirBorn]

Hello,

Thank you for your feedback

My question was regarding the type of the remote leaf uplinks interface type

I have seen that document. I was a bit confused by the paragraph "1G or 10G connectivity from remote leaf switches to upstream Router" where it seems that only optical SFPs are supported as remote leaf uplinks.

So, the Remote leaf upstream links could also be electrical (RJ45) 1GE ?

Regards

[Robert Burns]

As mentioned above, as long as the platform supports it, no issues.  You didn't mention the switch platform, so can't confirm without that info.

Robert

[AirBorn]

N9K-C93108TC-FX-24, we are  using QSA adapter

[Robert Burns · Accepted solution]

Yes, it's supported.
Ref: https://tmgmatrix.cisco.com/?dr=21&os=2&npid=148 

Robert